Replacing and Connecting  New Bottles and

Maintaining the Wine On Tap System

1. Uncork Wine Bottle. 

2. Place Tap near bottle slide plastic tube to about half way,  or until touching bottom of bottle. 

3. Insert  Tap in Bottle facing label, holding down top of tap screw down until touching then 1/4 turn DON’T OVER TIGHTEN which will result in damage. 

4. Connect gas tubing to tap pushing gently. 

5. You are ready to pour wine.  

6. Press tap down all the way otherwise it will mainly get nitrogen. Same principle as pouring beer.  

CLEANING THE WINE ON TAP SYSTEM 

Using beer line cleaner diluted as per instructions 

1.  Mix Cleaner in clean empty wine bottle and have second clean bottle ready. 

2. Insert tap in cleaning bottle and tighten, connect and empty contents in second bottle repeating procedure until all taps are clean. 

3.Fill clean empty bottle with water and repeat procedure until all taps are rinsed. 

4.Reconnect taps and start serving you are ready to go. 

5. Important that you clean taps every month.